A Practical Guide to SharePoint 2013

A Practical Guide to SharePoint 2013
A Practical Guide to SharePoint 2013 - Book by Saifullah Shafiq

Saturday, December 1, 2012

Setup SSL in SharePoint 2013 using commercial certificates


 
 
 Setup SSL in SharePoint 2013
In this article you will learn how to setup SSL in SharePoint 2013. In my next article I will show you how to setup an Extranet in SharePoint 2013. Corporations usually setup SSL for Extranet sites. There are three ways to setup SSL.
1.       One way is to use a commercial SSL certificate. There are many sites that sell SSL certificates. For learning purposes you can sign up for a trial version (30 days). This is what this article will focus on today.

2.       Second way is to use a self-signed certificate that  you create in IIS.

3.       Third way is to set up your server to issue a certificate. This is what you need if you have custom DNS entries. Of course, you can also use first option (using commercial certificate) if you have DNS entries. If you use self-signed certificate and you have DNS entries, you get an error. More on this in another article!
So, let’s start. In this article, I will show you how to use Verisign certificate. Verisign is one the most popular companies that issue SSL certificates. We will sign up for a trial version.
1.       Before you sign up on Verisign site, we first need to create a certificate request. This will be needed when  you sign up at Verisign.

2.       Open IIS 7.0 (Start > Administrative Tools > Internet Information Services (IIS) Manager).

3.       Click on the server name.

4.       In IIS section, double-click Server Certificates.

5.       On the right side, under Actions, click Create Certificate Request… link.

6.       Request Certificate form will open. Fill out the fields. Enter your site name or URL in the  Common Name field. Enter your company name or abbreviation in Organization and Organizational Unit fields. Enter City and State. Enter full state name, abbreviation is not accepted. Select Country/region and click Next.
 
7.       Keep the default values selected. Cryptographic service provider should have Microsoft RSA SChannel Cryptographic Provider selected. If it’s a test or development environment, you can keep Bit length set to 1024. If it’s a production environment and you are using a purchased SSL key, then select Bit length according to your needs. What kind of security is needed depends on what kind of site you have created and what kind of content it has. For confidential content or for government sites, you may want to select at least 2048 in Bit length. Remember, the greater the bit length, the stronger the security. However, a greater bit length may decrease performance.

8.       Browse to a folder that will store the request and give a name to the file, for example, sslrequest. Click Finish.

9.       Go to Verisign site and sign up for a trial version. Here is the direct link for the signup page:
 
 
Enter technical contact details and click Continue. On the next screen, you will be asked to enter CSR. Open the request file that you had created, copy it and paste it into the box on the site. Once you have signed up, you will get an email with the key.

10.   There will be three links in the email. Click the first link to download  and install the Test Root CA Certificate. On the download page, there are different browsers listed. Select the browser that you will use for your site testing. Remember if you know you audience will use different browsers then you need to perform this step for every browser that your audience will be using. Steps for Internet Explorer are listed next.

11.   Click the link Download Secure Site Trial Root Certificate link. From the box, copy the certificate and save it in a text file with a .cer extension.

12.   Open Internet Explorer.

13.   Go to Tools > Internet Options > Content > Certificates.

14.   Click Import…. A wizard will open. Click Next.

15.   Browse to the location of the recently stored .cer file (step 11 above).

16.   Select the certificate and click Open.

17.   Click Next.

18.   Select Automatically select the certificate store based on the type of the certificate. Click Ok.

19.   Click Next then Finish.

20.   When prompted and asked if you wish to add the following certificate to the root store, click Yes.

21.   Second step listed in the email confuses many people. Basically this step is not required for latest IIS server. Users using IIS 5.0 or Higher servers do not need to download the intermediate CA as it is included with the SSL certificate upon issuance if they selected in the purchase as server vendor: Microsoft IIS 5.0 or higher. If you are not sure about the selection you made when requesting SSL certificate, go ahead and install it. It will not harm anything. To install it, perform same steps as listed above (Steps 11 – 19). Be sure to click second link in your email instead of first when performing step 11.

22.   Just like the second step, third step in the email is equally confusing. Don’t follow those steps, follow the ones listed below to install the certificate without hassles.
23.   Copy the certificate from your email. It will be at the bottom of the email. Be careful when copying. Copy whole text including -----BEGIN CERTIFICATE----- and -----END CERTIFICATE----- and paste it into Notepad. There should be no white spaces or extra line breaks.  Save the file with .p7b extension. You can name the file as sslcert.p7b or whatever you prefer.

24.   Click Start > Run and type mmc and click OK. MMC console will open.

25.   From File, select Add/Remove Snap-in.
 

 
26.   Select Certificates from available snap-ins and click Add >.

27.   Select first option My user account and click Finish.

28.   Click OK.

29.   Expand Certificates – Current User node.

30.   Expand the Trusted Root Certification Authorities folder on the left and select the Certificates subfolder.

31.   Locate the following certificate:
a.       Issued To: VeriSign Class 3 Public Primary Certification Authority - G5

32.   Right-click the certificate and select Properties.
33.   In the Certificate purposes section, select Disable all purposes for this certificate. This is a pre-installed certificate and must be disabled before using new certificate from SSL.


 
34.   Click Apply then OK.
 

Install Certificate

 
35.   Finally, install the certificate. There are two ways to do it. One is through the IIS and the other is the MMC certificates console. I prefer the second way because you have to come to the MMC certificates console anyway to fix a problem if you opt to install the certificate through IIS. If you install the certificate through IIS, at the time of binding the certificate to your site, certificate will not show up in IIS and then you will have to come to the MMC certificates console to perform an additional step. So it’s better to go with the MMC route from the beginning.  There is another problem with the IIS method. You get the following error when you install the certificate through IIS.
 



 
Error Text: Cannot find the certificate request that is associated with this certificate file. A certificate request must be completed on the computer where the request was created.
 
36.   Open MMC console (Start > Run > Type MMC > Click OK).

37.   Certificates console will still be available because you added it in step 24 but if for some reason  you had to restart your machine or log out of it then you will have to add the console again. Follow steps 24 – 28 to add Certificates console. Expand Certificates – Current User node on the left.

38.   Expand Trusted Root Certification Authorities and click Certificates folder.

39.   Right-click Certificates folder and select All Tasks then select Import.

40.   Browse to the certificate (.p7b) file. Click Next.

41.   Select Place all certificates in the following store and leave default store selected. Click Next.

42.   Click Finish.

43.   You will get The import was successful message. Click Ok. You may also get following security warning.












 


Error Description: You are about to install a certificate from a certification authority (CA) claiming to represent: Verisign Trial Secure Server Root CA – G2.
If you get this security warning, click Yes to install the certificate.
44.   With MMC Certificates console still open, expand Personal folder on the left and right-click Certificates subfolder. Select All Tasks then select Import.

45.   Browse to certificate file (.p7b) and Click Next.

46.   Keep second option Place all certificates in the following store selected and keep Personal certificate selected as the default option. Click Next.

47.   Click Finish. You will get The import was successful message. Click Ok.

Bind Certificate to your site

 
48.   Finally, bind certificate to your site. Open IIS.

49.   Click server name. Expand Sites node.

50.   Click site name that you will bind to the SSL certificate.
51.   On the right, under Actions, click Bindings.

52.   Click Add.

53.   In Type, select https.

54.   Keep 443 in the Port. This is default port used for SSL.

55.   In SSL Certificate, select the certificate you just installed. Please note that if you don’t see new certificate in this drop down, then you probably missed steps 44 – 47 above. Click OK. That’s it.

Alternate Access Mappings

 
56.   Assuming you have a web application setup to work with SSL, configure Alternate Access Mappings to use site with SSL. Open Central Admin Site and click Application Management.

57.    Under Web Applications, click Configure alternate access mappings.

58.    You will notice you already have default site listed in the Default zone. To add new URL in the Intranet zone, click Add Internet URLs.

59.    From the Alternate Access Mapping Collection drop down, select correct application that you want to use for the AAM setting and then add URL in the text box labeled URL protocol, host and port, for example, https://www.walisystems.com. From the Zone dropdown, select Intranet.

60.    Click Save.
Now open site with https to test that everything works fine.

 
In the address bar, click the lock sign to check validity of the certificate. If you want to see the certificate, click View Certificates link at the bottom of the notification.

3 comments:

  1. Thanks for sharing the tips... you are doing really good job...Microsoft Sharepoint 2013

    ReplyDelete
  2. I appreciate the time you have taken on this post.
    Thanks for sharing.

    ReplyDelete
  3. Excellent post, thanks. Eased my day a lot. Just to add a little, if you are given the certificate and private key in separate files, you can follow the instructions on http://elgwhoppo.com/2013/04/18/combine-crt-and-key-files-into-a-pfx-with-openssl/ to merge them on a sigle PFX file with OpenSSL and then import the certificate. Without that, I couldn't get the certificate to be listed in step 55.

    ReplyDelete